Product Description
The Zerostart 8600910 Threaded Immersion Engine Block Heater is designed to provide direct coolant preheating before cold-weather engine startup. It is intended for select Mack E6 and EM6 with threaded core openings. Rated at 1,500 watts and 240 volts AC, it is designed for the specified electrical supply.
The threaded body connects to the engine’s designated coolant opening, placing the electrical element in the coolant rather than heating the engine from the outside. Warming the coolant and surrounding metal before cranking helps reduce the effects of a cold soak and supports more dependable startup in winter conditions.
This is the 240-volt configuration for the threaded side opening. Compare the power supply with the original heater; the 120-volt version is a separate part.
This replacement heater is suitable when the original element has failed or the correct mounting provision is available for an approved heater installation. Confirm whether the power cord, seals and other hardware are supplied with the stocked unit before ordering.
Specifications:
-
Part Number: 8600910
-
Brand: Zerostart
-
Manufacturer: Phillips & Temro Industries
-
Product Type: Threaded Immersion Engine Block Heater
-
Compatible Engines / Equipment: Select Mack E6 and EM6 with threaded core openings
-
Wattage: 1,500 W
-
Voltage: 240 V AC
-
Nominal Current (calculated): 6.25 A
-
Mounting Size / Configuration: 1-3/4 inch threaded opening
-
Compatible Replacement Cord: 8608377
-
Alternate Part Number Formatting: 860-0910
Verify the engine serial number, thread form and diameter, internal element clearance and electrical supply. Follow the manufacturer installation instructions; the element must be immersed in coolant before power is connected.