Product Description
The Holland RK-NT-ILS-S is a genuine SAF-Holland No-Tilt retrofit kit designed to convert compatible Holland Integrated Low-weight Slider (ILS) fifth wheel mounting systems to a rigid, non-tilting configuration. This conversion is intended for specialized vocational hauling operations, including frameless dump trailers equipped with an articulating upper coupler.
The retrofit kit provides the brackets, sliding plate, handle assembly, stop blocks, and mounting hardware necessary to modify a compatible Holland ILS sliding base for No-Tilt operation. The conversion restricts fifth wheel articulation while retaining the ability to adjust the fifth wheel's position along the sliding base.
Designed for 9-inch Holland ILS fifth wheel configurations, the RK-NT-ILS-S can be used with compatible FW35 and FW33 No-Tilt top plates. Systems with other mounting heights require conversion to the appropriate 9-inch configuration before installing this kit.
Manufacturer: SAF-Holland
Brand: Holland
Part Number: RK-NT-ILS-S
Product Type: Fifth Wheel No-Tilt Slider Retrofit Kit
Mounting System: Holland Integrated Low-weight Slider (ILS)
Required Fifth Wheel Height: 9 Inches
Compatible Top Plates: Holland FW35 and FW33 No-Tilt Models
Kit Includes:
1 No-Tilt Shaft and Handle Assembly
1 Right-Hand No-Tilt Bracket
1 Left-Hand No-Tilt Bracket
1 No-Tilt Sliding Plate
2 Stop Blocks
1 Lock Pin with Lanyard
Required Mounting Bolts and Lock Washers
Important Fitment Information:
This kit is designed for compatible Holland ILS fifth wheel sliders with an overall fifth wheel height of 9 inches. Other configurations may require the Holland RK-10689-3 bracket conversion kit.
Installation reduces the existing slider's available travel by 6 inches and moves its rearmost engagement position forward by 6 inches.
The fifth wheel top plate, complete slider base, and mounting angles are not included.
Verify the existing fifth wheel model, mounting configuration, and required components before ordering. Installation should be performed according to SAF-Holland's No-Tilt retrofit instructions.
