Product Description
The ConMet 10082230 is a heavy-duty PreSet iron trailer hub assembly designed for TP trailer axle wheel ends using drum brakes. It combines durable iron construction with ConMet’s PreSet wheel-end system for dependable commercial trailer service.
The 10082230 features a 10-stud hub-piloted HP10 mounting configuration and uses M22 x 1.5 mm wheel studs on an approximately 11.25-inch bolt circle. The 3.17-inch wheel-stud standout is configured for steel wheels.
ConMet rates this hub at 12,500 lb per wheel end, corresponding to a 25,000 lb GAWR trailer axle configuration. The hub uses bearing set 432 in both the inboard and outboard positions and includes a stamped ABS tone ring.
ConMet’s PreSet design incorporates matched bearing components and a precision spacer to establish proper wheel-end bearing adjustment, reducing the need for conventional manual end-play adjustment during installation.
Product Details:
- Manufacturer: ConMet
- Part Number: 10082230
- Product Type: PreSet Trailer Hub Assembly
- Axle Position: Trailer
- Axle Type: TP
- Hub Material: Iron
- Brake Type: Drum Brake
- Hub Technology: PreSet
- Hub Mounting System: HP10
- Wheel Configuration: 10-Stud Hub Piloted
- Wheel Stud Thread: M22 x 1.5 mm
- Wheel Stud Bolt Circle: Approximately 11.25 in.
- Wheel Stud Standout: 3.17 in.
- Hub Flange Offset: Approximately 1.35 in.
- Inboard Bearing Set: 432
- Outboard Bearing Set: 432
- Hub Load Rating: 12,500 lb
- GAWR: 25,000 lb
- ABS: Stamped ABS Tone Ring
- Designed for Steel Wheels
- Approximate Weight: 60–61 lb
- Bulk Part Number: 10082230B
Always verify the ConMet part number, TP axle configuration, wheel type, stud dimensions, brake setup, bearing configuration, and existing wheel-end components before ordering.
