Product Description
The Zerostart 8600031 Threaded Immersion Engine Block Heater is designed to provide direct coolant preheating before cold-weather engine startup. It is intended for Cummins L10, M11 and compatible ISM configurations. Rated at 1,500 watts and 240 volts AC, it is designed for the specified electrical supply.
The threaded body connects to the engine’s designated coolant opening, placing the electrical element in the coolant rather than heating the engine from the outside. Warming the coolant and surrounding metal before cranking helps reduce the effects of a cold soak and supports more dependable startup in winter conditions.
Legacy Zerostart catalog lists this 240-volt version for the threaded heater casting. Do not connect to a 120-volt cord or substitute the 120-volt 8600015 without checking the supply.
This replacement heater is suitable when the original element has failed or the correct mounting provision is available for an approved heater installation. Confirm whether the power cord, seals and other hardware are supplied with the stocked unit before ordering.
Specifications:
-
Part Number: 8600031
-
Brand: Zerostart
-
Manufacturer: Phillips & Temro Industries
-
Product Type: Threaded Immersion Engine Block Heater
-
Compatible Engines / Equipment: Cummins L10, M11 and compatible ISM configurations
-
Wattage: 1,500 W
-
Voltage: 240 V AC
-
Nominal Current (calculated): 6.25 A
-
Mounting Size / Configuration: 38 mm thread
-
Compatible Replacement Cord: 8608377
-
Alternate Part Number Formatting: 860-0031
Verify the engine serial number, thread form and diameter, internal element clearance and electrical supply. Follow the manufacturer installation instructions; the element must be immersed in coolant before power is connected.