Product Description
The Zerostart 3500013 Threaded Immersion Engine Block Heater is designed to provide direct coolant preheating before cold-weather engine startup. It is intended for select Caterpillar 3196, C10, C12 and 3406 with BrakeSaver (1994 and newer); compatible John Deere 6105/6125 engines. Rated at 1,500 watts and 120 volts AC, it is designed for the specified electrical supply.
The threaded body connects to the engine’s designated coolant opening, placing the electrical element in the coolant rather than heating the engine from the outside. Warming the coolant and surrounding metal before cranking helps reduce the effects of a cold soak and supports more dependable startup in winter conditions.
The installation uses a threaded coolant port associated with the oil cooler; location varies by engine. The 3176 is separately listed with 8601267; verify by engine serial number.
This replacement heater is suitable when the original element has failed or the correct mounting provision is available for an approved heater installation. Confirm whether the power cord, seals and other hardware are supplied with the stocked unit before ordering.
Specifications:
-
Part Number: 3500013
-
Brand: Zerostart
-
Manufacturer: Phillips & Temro Industries
-
Product Type: Threaded Immersion Engine Block Heater
-
Compatible Engines / Equipment: Select Caterpillar 3196, C10, C12 and 3406 with BrakeSaver (1994 and newer); compatible John Deere 6105/6125 engines
-
Wattage: 1,500 W
-
Voltage: 120 V AC
-
Nominal Current (calculated): 12.50 A
-
Mounting Size / Configuration: 1 inch NPT
-
Compatible Replacement Cord: 3600008
-
Alternate Part Number Formatting: 350-0013
Verify the engine serial number, thread form and diameter, internal element clearance and electrical supply. Follow the manufacturer installation instructions; the element must be immersed in coolant before power is connected.