Product Description
The Zerostart 8605556 Threaded Immersion Engine Block Heater is designed to provide direct coolant preheating before cold-weather engine startup. It is intended for select Caterpillar 3406 and 3406E configurations, and other catalog-listed engines. Rated at 1,500 watts and 120 volts AC, it is designed for the specified electrical supply.
The threaded body connects to the engine’s designated coolant opening, placing the electrical element in the coolant rather than heating the engine from the outside. Warming the coolant and surrounding metal before cranking helps reduce the effects of a cold soak and supports more dependable startup in winter conditions.
Catalog element length is 5 inches. On compatible Caterpillar engines, the heater uses an oil-cooler bonnet coolant opening; the 1998 3406E design requires 3500033 instead. Confirm any 3408 fitment by serial number.
This replacement heater is suitable when the original element has failed or the correct mounting provision is available for an approved heater installation. Confirm whether the power cord, seals and other hardware are supplied with the stocked unit before ordering.
Specifications:
-
Part Number: 8605556
-
Brand: Zerostart
-
Manufacturer: Phillips & Temro Industries
-
Product Type: Threaded Immersion Engine Block Heater
-
Compatible Engines / Equipment: Select Caterpillar 3406 and 3406E configurations, and other catalog-listed engines
-
Wattage: 1,500 W
-
Voltage: 120 V AC
-
Nominal Current (calculated): 12.50 A
-
Mounting Size / Configuration: 1 inch NPT
-
Compatible Replacement Cord: 3600008
-
Element Length: 5 inches
-
Alternate Part Number Formatting: 860-5556
Verify the engine serial number, thread form and diameter, internal element clearance and electrical supply. Follow the manufacturer installation instructions; the element must be immersed in coolant before power is connected.